AME Goals

From IoT with AME
Revision as of 09:24, 19 June 2018 by Ctreber (talk | contribs) (Created page with "The AME Stack Functional design goals: * Support deployment of multiple devices of the same kind, without having to change the configuration in multiple files * Simply a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The AME Stack

Functional design goals:

  • Support deployment of multiple devices of the same kind, without having to change the configuration in multiple files
  • Simply add standard-capabilities like measuring temperature or switching a relay to a device
  • Provide status information for debugging and operations, without consuming too much memory and processing time

Architectural design goals:

  • Have MQTT interface with TCP, not with the ESP8266
  • Use streaming instead of a chain of buffers, as buffers are limited and awkward to handle (make them too big and memory is gone; make them too small and you'll get overruns)
  • I want my code to be readable by humans. And, yes, this can be done. Even in the limited Arduino environment. Without compromising speed and memory consumption.

Hardware design goals:

  • As little wiring as possible, as wiring is tiring after when assembling multiple devices

The AME Stack